Optimization of the SiC Powder Source Material for Improved Process Conditions During PVT Growth of SiC Boules

Development of a Zeolite A/LDH Composite for Simultaneous Cation and Anion Removal

Residual Lattice Strain and Phase Distribution in Ti-6Al-4V Produced by Electron Beam Melting

Effect of Carbonation on Abrasion Resistance of Alkali-Activated Slag with Various Activators

Evaluation of the Microstructure and Mechanical Properties of a New Modified Cast and Laser-Melted AA7075 Alloy

P3HT Nanofibrils Thin-Film Transistors by Adsorbing Deposition in Suspension

Antimicrobial Activity of Protamine-Loaded Calcium Phosphates against Oral Bacteria

A Hybrid Modeling of the Physics-Driven Evolution of Material Addition and Track Generation in Laser Powder Directed Energy Deposition

Electroanalytical Performance of Nitrogen-Doped Graphene Films Processed in One Step by Pulsed Laser Deposition Directly Coupled with Thermal Annealing

Investigation of the Quench Sensitivity of an AlSi10Mg Alloy in Permanent Mold and High-Pressure Vacuum Die Castings

Francis Breton,Mengyun Liu,X.-Grant Chen,Zhan Zhang

Comparative Life Cycle Assessment of a Novel Al-Ion and a Li-Ion Battery for Stationary Applications

The Application of Electrical Parameters to Reflect the Hydration Process of Cement Paste with Rice Husk Ash

Optical Properties of Red-Emitting Rb2Bi(PO4)(MoO4):Eu3+ Powders and Ceramics with High Quantum Efficiency for White LEDs

α-Fe2O3 Nanoparticles/Vermiculite Clay Material: Structural, Optical and Photocatalytic Properties

Ji？í Pavlovsky,Joná？ Tokarsky,Kamila Ko？í,Marta Valá？ková,Tomá？ Prostějovsky

The Influence of Surface Wettability and Topography on the Bioactivity of TiO2/Epoxy Coatings on AISI 316L Stainless Steel

Aleksandra Kocijan,Marjetka Conradi,Matej Ho？evar

Synthesis, Characterization, and Crystal Structures of Imides Condensed with p-Phenylamino(Phenyl) Amine and Fluorescence Property

Huaibo Ma,Jing Zhang

“Traditional” Sol-Gel Chemistry as a Powerful Tool for the Preparation of Supported Metal and Metal Oxide Catalysts

Improvement in Fatigue Behavior of Dental Implant Fixtures by Changing Internal Connection Design: An In Vitro Pilot Study

Effect of Atmospheric Cold Plasma Treatment on the Adhesion and Tribological Properties of Polyamide 66 and Poly(Tetrafluoroethylene)

Identification of the Degree of Degradation of Fibre-Cement Boards Exposed to Fire by Means of the Acoustic Emission Method and Artificial Neural Networks

Rheological Property Criteria for Buildable 3D Printing Concrete

Preparation and Electrochemical Characterization of Organic–Inorganic Hybrid Poly(Vinylidene Fluoride)-SiO2 Cation-Exchange Membranes by the Sol-Gel Method Using 3-Mercapto-Propyl-Triethoxyl-Silane

Mechanical Properties of Natural Rubber Filled with Foundry Waste Derived Fillers

Chan Xie,Daqi Huang,Fajun Wang,Jiawei Liu,Sheng Lei,Shijin Yu,Ting Xie

Thermoresistive Properties of Graphite Platelet Films Supported by Different Substrates

Dielectric and Energy Storage Properties of Ba(1？x)CaxZryTi(1？y)O3 (BCZT): A Review

Proposing a New Method Based on Image Analysis to Estimate the Segregation Index of Lightweight Aggregate Concretes

Microstructure and Mechanical Properties of Spark Plasma Sintered Si3N4/WC Ceramic Tools

Jiheng Jia,Liyan Cao,Ning Sun,Yulin Wang,Zhenhua Wang

Surface Characterization and Corrosion Behavior of 90/10 Copper-Nickel Alloy in Marine Environment

Lu Han,Ning Li,Tingzhu Jin,Wei Dai,Weifang Zhang,Xuerong Liu

Cutting Characteristics for Sugar Maple Using Single Grit with Spherical Cone and Triangular Pyramid Geometries

Fabrication and Application of Carboxymethyl Cellulose-Carbon Nanotube Aerogels

Caili Zhang,Fenfen Li,Linyu Long,Mengying Shu,Yunxuan Weng

Strain-Rate-Dependent Tensile Response of Ti–5Al–2.5Sn Alloy

A Study of the Structural Characteristics of Titanium Alloy Products Manufactured Using Additive Technologies by Combining the Selective Laser Melting and Direct Metal Deposition Methods

Barkhausen Noise Emission in Hard-Milled Surfaces

Stimuli-Responsive Systems in Optical Humidity-Detection Devices

Surface Characterization and Tribological Performance of Anodizing Micro-Textured Aluminum-Silicon Alloys

Bing Wang,Long Chen,Luanxia Chen,Qinghua Song,Yi Wan,Zhanqiang Liu

PCSEL Performance of Type-I InGaAsSb Double-QWs Laser Structure Prepared by MBE

The Preparation of FeCo/ZnO Composites and Enhancement of Microwave Absorbing Property by Two-Step Method

Effect of Silica Fume in Concrete on Mechanical Properties and Dynamic Behaviors under Impact Loading

SEM Image Analysis in Permeable Recycled Concretes with Silica Fume. A Quantitative Comparison of Porosity and the ITZ

Carlos A. Rosas-Casarez,José M. Gómez-Soberón,Manuel J. Chinchillas-Chinchillas,Ramón Corral-Higuera,Susana P. Arredondo-Rea

Effect of CNTs in Copper Matrix on Mechanical Characteristics and Tribological Behavior under Dry Sliding and Boundary Lubrication Conditions

Fenghua Luo,Haibin Zhou,Hui Deng,Lin Zhao,Minwen Deng,Pingping Yao,Taimin Gong,Yang Li,Yelong Xiao,Zhongyi Zhang

Probing Slip Differential Heat of Magnetorheological Fluids Subjected to Shear Mode Operation and Its Effect on the Structure

Jing Yang,Song Chen

Autogenous Shrinkage, Microstructure, and Strength of Ultra-High Performance Concrete Incorporating Carbon Nanofibers

The Influence of Copper Substrates on Irradiation Effects of Graphene: A Molecular Dynamics Study

Reactive Powder Concrete Mix Ratio and Steel Fiber Content Optimization under Different Curing Conditions

Study of Structure and Mechanical Properties of Fine-Grained Aluminum Alloys Al-0.6wt.%Mg-Zr-Sc with Ratio Zr:Sc = 1.5 Obtained by Cold Drawing

Microwave-Assisted Synthesis of High-Energy Faceted TiO2 Nanocrystals Derived from Exfoliated Porous Metatitanic Acid Nanosheets with Improved Photocatalytic and Photovoltaic Performance

The Martensitic Transformation and Mechanical Properties of Ti6Al4V Prepared via Selective Laser Melting

Effect of Fibers on High-Temperature Mechanical Behavior and Microstructure of Reactive Powder Concrete

Enzymatically Functionalized Composite Materials Based on Nanocellulose and Poly(Vinyl Alcohol) Cryogel and Possessing Antimicrobial Activity

Co-Polymers based on Poly(1,4-butylene 2,5-furandicarboxylate) and Poly(propylene oxide) with Tuneable Thermal Properties: Synthesis and Characterization