Editorial Board

Biography

Dr. Pavol Hvizdos

Institute of Materials Science, Slovak Academy of Sciences, Kosice, Slovakia
Email: [email protected] (preferred), [email protected]

Qualifications

1996  Ph.D., Material Science, TechnicalUniversity, Kosice, Slovakia
1988  M.Sc., Solid State Physics, P. J. SafárikUniversity, Kosice, Slovakia

Publications (Selected)

  1. SAJGALIK, P., HNATKO, M., LOFAJ, F., HVIZDOS, P., DUSZA, J., WARBICHLER, P., HOFFER, F., RIEDEL, R., LECOMTE, E. and HOFFMANN, M.J., 2000. SiC/Si3N4 Nano/Micro-Composite-Processing, RT and HT Mechanical Properties. Journal of the European Ceramic Society, vol. 20,  pp.453-462.
  2. ALGUERO, M., BUSHBY, A., HVIZDOS, P., REECE, M.J., WHATMORE, R. and ZHANG, Q., 2001. Mechanical and Electromechanical Properties of PZT Sol-Gel Thin Films Measured by Nanoindentation. Integrated Ferroelectrics, vol. 41, pp. 53-62.
  3. HVIZDOS, P., REECE, M.J. and TORRECILLAS, R., 2001. Fatigue Behaviour of Mullite Studied by Indentation Flexure Method. Journal of the European Ceramic Society, vol. 21, pp. 53-61.
  4. HVIZDOS, P., BESTERCI, M., BALLóKOVá, B., SCHOLL, R. and BHM, A., 2001. Creep Behaviour of MoSi2-SiC and MoSi2-HfO2. Materials Letters, vol. 51, pp. 485-489.
  5. HVIZDOS, P., REECE, M.J. and BUSHBY, A., 2002. Depolarisation of PZT Thin Films by Nanoindentation. Integrated Ferroelectrics, vol. 50, pp. 199-207.
  6. LOFAJ, F., HVIZDOS, P., DORáKOVá, F., SATET, R., HOFFMANN, M.J. and DE ARELLANO-LóPEZ, A., 2003. Indentation Moduli and Microhardness of RE-Si-Mg-O-N Glasses (RE=Sc,Y,La,Sm,Yb and Lu) with Different Nitrogen Content. Materials Science and Engineering A, vol. 357, pp. 181-187.
  7. HVIZDOS, P., DUSZA, J., STEINKELLNER, W. and KROMP, K., 2004. Creep Behaviour of MoSi2 and MoSi2 + SiC Composite. Journal of Materials Science, vol. 39, pp. 4073-4077.
  8. DUSZA, J., KOVALíK, J., HVIZDOS, P., SAJGALíK, P., HNATKO, M. and REECE, M.J., 2004. Creep Behavior of a Carbon-Derived Si3N4/SiC Nanocomposite. Journal of the European Ceramic Society, vol. 24, pp. 3307-3315.
  9. HVIZDOS, P., KASIAROVá, M., DUSZA, J., HNATKO, M. and SAJGALíK, P., 2004. Mechanical Properties of Si3N4/SiC Nanocomposites Studies by Instrumented Indentation with Spheres. Journal of the European Ceramic Society, vol. 24, pp. 3345-3350.
  10. HVIZDOS, P., BESTERCI, M., SLESáR, M. and EDTMAIER, Ch. 2005. Compressive Creep Testing of Pt-Y2O3 Composites. High Temperature Materials and Processes, vol. 24, pp. 189-192.
  11. BESTERCI, M., BALLóKOVá, B., HVIZDOS, P., SCHOLL, R. and BHM, A., 2005. Creep Behaviour of MoSi2-HfO2 Composites. Journal of Materials Science, vol. 40, pp. 3869-3871.
  12. DUSZA, J., KOVALíK, J., HVIZDOS, P., SAJGALíK, P., HNATKO, M. and REECE, M.J., 2005. Enhanced Creep Resistant Silicon-Nitride-Based Nanocomposite. Journal of the American Ceramic Society, vol. 88, pp. 1500-1503.
  13. HVIZDOS, P., JONSSON, D., ANGLADA, M., VAN DER BIEST, O. and ANNé, G., 2007. Mechanical properties and thermal shock behaviour of alumina/zirconia functionally graded material prepared by electrophoretic deposition, Journal of the European Ceramic Society, vol. 27, pp. 1365-1371.
  14. HVIZDOS, P., PUCHY, V., DUSZOVá, A. and DUSZA, J., 2010. Tribological behavior of carbon nanofiber-zirconia composite. Scripta Materialia, vol. 63, pp. 254-257. ISSN 1359-6462.
  15. HVIZDOS, P., MESTRA, A. and ANGLADA, M., 2010. Effect of heat treatment on wear damage mechanisms in 3Y-TZP ceramics. Wear, vol. 269, pp. 26-30. ISSN 0043-1648.
  16. TATARKO, P., KASIAROVá, M., DUSZA, J., MORGIEL, J., SAJGALíK, P. and HVIZDOS, P. 2010. Wear resistance of hot-pressed Si3N4/SiC micro/nanocomposites sintered with rare-earth oxide additives. Wear, vol. 269, pp. 867-874. ISSN 0043-1648.
  17. LOFAJ, F., STADLER, H., FUCHSOVá, G., HVIZDOS, P. and DUSZOVá, A., 2011. Elastic properties of thin WC/C coatings. Chemické listy, vol. 105, pp. S684-S687. ISSN 0009-2770.
  18. HVIZDOS, P. and BESTERCI, M., 2011. Effect of microstructure of Cu-Al2O3 composite on nano-hardness and wear parameters. Chemické listy, vol. 105, pp. S696-S699. ISSN 0009-2770.
  19. HVIZDOS, P., PUCHY, V., DUSZOVá, A., DUSZA, J. and BALáZSI, C., 2012. Tribological and electrical properties of ceramic matrix composites with carbon nanotubes. Ceramics International, vol. 38, pp. 5669-5676. ISSN 0272-8842.
  20. HVIZDOS, P., Besterci, M. and Kulu, P., 2012. Tribological characteristics of micro- and nano-composites Cu-Al2O3 at room and elevated temperatures. High Temperature Materials and Processes, vol. 30, pp. 573-577.
  21. BRUNCKOVá, H., MEDVECKY,. and HVIZDOS, P., 2013. Effect of substrate on microstructure and mechanical properties of sol-gel prepared (K, Na)NbO3 thin films. Materials Science and Engineering B - Solid-State Materials for Advanced Technology, vol. 178, pp. 254-262. ISSN 0921-5107.
  22. DUSZOVá, A., HALGAS, R., BANDA, M., HVIZDOS, P., LOFAJ, F., DUSZA, J. and MORGIEL, J., 2013. Nanoindentation of WC-Co hardmetals, Journal of the European Ceramic Society, vol 33., pp. 2227-2232.
  23. HVIZDOS, P., DUSZA, J. and BALáZSI, C., 2013. Tribological properties of Si3N4-graphene nanocomposites. Journal of the European Ceramic Society, vol 33., pp. 2359-2364.
  24. DUSZOVá, A., HVIZDOS, P., LOFAJ, F., MAJOR, L., DUSZA, J. and MORGIEL, J., 2013. Indentation fatigue of WC-Co cemented carbides. International Journal of Refractory Metals and Hard Materials, vol. 41, pp. 229-235. ISSN 0263-4368.
  25. HVIZDOS, P., BESTERCI, M., KULU, P. and KVAKAJ, T., 2013. Tribological characteristics of copper based composites with Al2O3 particles at various temperatures. High Temperature Materials and Processes, vol. 32, pp. 437-442. ISSN 0334-6455.