Introduction: The integration of 3D printing in dentistry is revolutionizing the manufacturing of prosthetics and dental medical devices. This article examines the various applications of 3D printing, particularly in the production of removable and fixed prostheses, as well as its use in endodontics and pediatric dentistry. Materials and Methods: A literature review was conducted using databases such as PubMed and Google Scholar, applying specific keywords and Boolean equations to select relevant studies. Inclusion and exclusion criteria were established to ensure the relevance and quality of the analyzed data. Results: The systematic review analyzed numerous studies on the application of 3D printing in dentistry, covering technologies, materials, and clinical applications. The observed benefits include increased customization, improved clinical outcomes, long-term cost reduction, and better communication with patients. Studies have shown that dental devices produced by 3D printing exhibit better clinical performance and increased accuracy compared to conventional methods. Discussion: The integration of 3D printing in dentistry offers more efficient and personalized solutions. The main advantages are increased accuracy and reduced costs and manufacturing time. However, further research is needed to evaluate the long-term impact of these technologies and optimize their use. Conclusion: 3D printing in dentistry presents significant advantages in terms of precision, customization, and efficiency. This technology represents a major advancement, improving clinical outcomes and patient satisfaction. Continued research is essential to maximize its clinical potential.
Cite this paper
Ziyati, O. , Abou-Obeida, S. , Zerati, I. and Boussiri, K. E. (2025). Three-Dimensional Printing in Dentistry. Open Access Library Journal, 12, e2384. doi: http://dx.doi.org/10.4236/oalib.1112384.
Barazanchi, A., Li, K.C., Al‐Amleh, B., Lyons, K. and Waddell, J.N. (2017) Additive Technology: Update on Current Materials and Applications in Dentistry. Journal of Prosthodontics, 26, 156-163. https://doi.org/10.1111/jopr.12510
Tumbleston, J.R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A.R., Kelly, D., et al. (2015) Continuous Liquid Interface Produc-tion of 3D Objects. Science, 347, 1349-1352. https://doi.org/10.1126/science.aaa2397
Zandinejad, A., Methani, M.M., Schneiderman, E.D., Revilla‐León, M. and BDS, D.M. (2019) Fracture Resistance of Additively Manufactured Zirconia Crowns When Cemented to Implant Supported Zirconia Abutments: An in Vitro Study. Journal of Prosthodontics, 28, 893-897. https://doi.org/10.1111/jopr.13103
Ngo, T.D., Kashani, A., Imbalzano, G., Ngu-yen, K.T.Q. and Hui, D. (2018) Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges. Composites Part B: Engineering, 143, 172-196. https://doi.org/10.1016/j.compositesb.2018.02.012
Tian, Y., Chen, C., Xu, X., Wang, J., Hou, X., Li, K., et al. (2021) A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications. Scanning, 2021, Article ID: 9950131. https://doi.org/10.1155/2021/9950131
Hazeveld, A., Huddleston Slater, J.J.R. and Ren, Y. (2014) Accuracy and Reproducibility of Dental Replica Models Reconstructed by Different Rapid Prototyping Techniques. American Journal of Orthodontics and Dentofacial Orthopedics, 145, 108-115. https://doi.org/10.1016/j.ajodo.2013.05.011
Hazeveld, A., Huddleston Slater, J.J.R. and Ren, Y. (2014) Accuracy and Reproducibility of Dental Replica Models Reconstructed by Different Rapid Prototyping Techniques. American Journal of Orthodontics and Dentofacial Orthopedics, 145, 108-115. https://doi.org/10.1016/j.ajodo.2013.05.011
Ganz, S.D. (2005) Presurgical Planning with CT-Derived Fabrication of Surgical Guides. Journal of Oral and Maxillofacial Surgery, 63, 59-71. https://doi.org/10.1016/j.joms.2005.05.156
Schnutenhaus, S., von Koenigsmarck, V., Blender, S., Ambrosius, L., Luthardt, R.G. and Rudolph, H. (2018) Precision of Sleeveless 3D Drill Guides for Insertion of One-piece Ceramic Implants: A Prospective Clinical Trial. International Journal of Computerized Dentistry, 21, 97-105.
Barrak, I., Joób-Fancsaly, á., Braunitzer, G., Varga, E., Boa, K. and Piffkó, J. (2018) Intraosseous Heat Generation during Osteotomy Performed Freehand and through Template with an Integrated Metal Guide Sleeve: An in Vitro Study. Implant Dentistry, 27, 342-350. https://doi.org/10.1097/id.0000000000000763
Koop, R., Vercruyssen, M., Vermeulen, K. and Quirynen, M. (2013) Tolerance within the Sleeve Inserts of Different Surgical Guides for Guided Implant Surgery. Clinical Oral Implants Research, 24, 630-634. https://doi.org/10.1111/j.1600-0501.2012.02436.x
Maspero, C. and Tartaglia, G.M. (2020) 3D Printing of Clear Orthodontic Aligners: Where We Are and Where We Are Going. Materials, 13, Article 5204. https://doi.org/10.3390/ma13225204
Tartaglia, G.M., Mapelli, A., Maspero, C., Santaniello, T., Serafin, M., Far-ronato, M., et al. (2021) Direct 3D Printing of Clear Orthodontic Aligners: Current State and Future Possibilities. Materials, 14, Article 1799. https://doi.org/10.3390/ma14071799
Pawar, B. (2019) Maintenance of Space by Innovative Three-Dimensional-Printed Band and Loop Space Maintainer. Journal of Indian Society of Pedodontics and Preventive Den-tistry, 37, 205-208. https://doi.org/10.4103/jisppd.jisppd_9_19
Bammani, S.S., Birajdar, P.R. and Metan, S.S. (2012) Dental Crown Manufacturing using Stereolithography Method. Proceeding of International Conference on Advances in In-dustrial and Production Engineering Solapur, Maharashtra, 7-10.
Wang, W., Yu, H., Liu, Y., Jiang, X. and Gao, B. (2019) Trueness Analysis of Zirconia Crowns Fabricated with 3-Dimensional Printing. The Journal of Prosthetic Dentistry, 121, 285-291. https://doi.org/10.1016/j.prosdent.2018.04.012
Pompa, G., Di Carlo, S., De Angelis, F., Cristalli, M.P. and Annibali, S. (2015) Comparison of Conventional Methods and Laser-Assisted Rapid Prototyping for Manufacturing Fixed Dental Prostheses: An in Vitro Study. BioMed Research International, 2015, Article ID: 318097. https://doi.org/10.1155/2015/318097
Chaturvedi, S., Alqahtani, N.M., Addas, M.K. and Alfarsi, M.A. (2020) Mar-ginal and Internal Fit of Provisional Crowns Fabricated Using 3D Printing Technology. Technology and Health Care, 28, 635-642. https://doi.org/10.3233/thc-191964
Tahayeri, A., Morgan, M., Fugolin, A.P., Bompolaki, D., Athirasala, A., Pfeifer, C.S., et al. (2018) 3D Printed versus Conventionally Cured Provisional Crown and Bridge Dental Materials. Dental Materials, 34, 192-200. https://doi.org/10.1016/j.dental.2017.10.003
Mai, H., Lee, K. and Lee, D. (2017) Fit of In-terim Crowns Fabricated Using Photopolymer-Jetting 3D Printing. The Journal of Prosthetic Dentistry, 118, 208-215. https://doi.org/10.1016/j.prosdent.2016.10.030
Jardel, V., Leize-Zal, E. and Chauvel, B. (2016) CAD/CAM and Laser Microfu-Sion: Study of the Adaptation of Single Metal Crowns. Stratégie Prothétique, 16.
Huang, Z., Zhang, L., Zhu, J. and Zhang, X. (2015) Clinical Marginal and Internal Fit of Metal Ceramic Crowns Fabricated with a Selective Laser Melting Technology. The Journal of Prosthetic Dentistry, 113, 623-627. https://doi.org/10.1016/j.prosdent.2014.10.012
Kalberer, N., Mehl, A., Schimmel, M., Müller, F. and Srinivasan, M. (2019) CAD-CAM Milled versus Rapidly Prototyped (3D-Printed) Complete Dentures: An in Vitro Evaluation of Trueness. The Journal of Prosthetic Dentistry, 121, 637-643. https://doi.org/10.1016/j.prosdent.2018.09.001
Tasaka, A., Matsunaga, S., Odaka, K., Ishizaki, K., Ueda, T., Abe, S., et al. (2019) Accuracy and Retention of Denture Base Fabricated by Heat Curing and Additive Manufacturing. Journal of Prosthodontic Research, 63, 85-89. https://doi.org/10.1016/j.jpor.2018.08.007
Yoon, H., Hwang, H., Ohkubo, C., Han, J. and Park, E. (2018) Evaluation of the Trueness and Tissue Surface Adaptation of CAD-CAM Mandibular Denture Bases Manufactured Using Digital Light Processing. The Journal of Prosthetic Dentistry, 120, 919-926. https://doi.org/10.1016/j.prosdent.2018.01.027
Bibb, R., Eggbeer, D. and Williams, R. (2006) Rapid Manufacture of Removable Partial Denture Frameworks. Rapid Prototyping Journal, 12, 95-99. https://doi.org/10.1108/13552540610652438
Jeong, M., Radomski, K., Lopez, D., Liu, J.T., Lee, J.D. and Lee, S.J. (2023) Materials and Applications of 3D Printing Technology in Dentistry: An Overview. Dentistry Journal, 12, Article 1. https://doi.org/10.3390/dj12010001
Anderson, J., Wealleans, J. and Ray, J. (2018) Endodontic Applications of 3D Printing. International Endodontic Journal, 51, 1005-1018. https://doi.org/10.1111/iej.12917
